@article { author = {Ashrafi, Seyyed Mostafa and Azhdary, Khalil and Hossieni, seyyed , Hossin and Emamgholizadeh, Samad}, title = {Optimal Position of Apron and Cut off in Reduction of Seepage Factors in Foundation of Diversion Dams}, journal = {Irrigation and Water Engineering}, volume = {10}, number = {4}, pages = {127-143}, year = {2020}, publisher = {انجمن علمی مهندسی آبیاری و آب ایران}, issn = {2251-7359}, eissn = {}, doi = {10.22125/iwe.2020.110074}, abstract = {Seepage of diversion dams foundation and importance of its control, has always been of interest to researchers. In this study, seepage parameters and their control, were investigated experimentally, numerically and analytically. Results showed that using apron and cut off were effective on reduction of seepage discharge so that model with apron and two cut off for upstream head of 47 cm, seepage discharge about 60% decreased and occurrence of piping postponed. Investigations showed that outlet discharge had direct relation with upstream water head. Using a cut off on dam foundation showed the best performance on reduction of uplift force and reduced about 22%. Also application of apron and two cut off beside the control of piping, decreased exit gradient for upstream head of 75 cm up to 0.763. Results for model of apron and cut off on foundation in control of seepage discharge was so similar to model of apron and two cut off, so it is suitable alternative in terms of economic instead of apron and two cut off. Numerical model had good agreement with experimental model on simulation of exit gradient, uplift force and seepage discharge for whole models and error was less than 5%. Results showed, when cut off located at the center of apron, flow line was more symmetrical, potential line and potential changes under the apron were less. Also results compared with different analytical models and Khosla method showed more similarity with experimental and numerical results.}, keywords = {Cut off,Seepage,apron,exit gradient,experimental and numerical model,Uplift force}, title_fa = {موقعیت بهینه پرده آب بند و کف بند در کاهش فاکتورهای نشت در پی سدهای انحرافی}, abstract_fa = {نشت آب از پی سدهای انحرافی و اهمیت کنترل آن، همواره مورد توجه محققین بوده است. در این تحقیق به بررسی آزمایشگاهی، عددی و تحلیلی نشت آب و راه­های کنترل آن پرداخته شده است. نتایج نشان داد که استفاده از کف­بند و پرده آب بند تاثیر زیادی در کاهش دبی نشت داشته، به طوری­که برای مدل کف­بند با دو پرده آب­بند، به­ ازای هد بالادست 47 سانتی­متر، مقدار دبی نشت 60% کاهش نشان داد و وقوع پدیده جوشش را به تاخیر انداخت. بررسی­ها نشان داد که دبی خروجی با عمق آب بالادست رابطه خطی داشت. استفاده از یک پرده آب­بند در پی سد نیز بهترین عملکرد را در کاهش نیروی زیرفشار از خود نشان داد که حدود 22% آن را کاهش داد. همچنین کاربرد دو پرده آب­بند و کف­بند علاوه بر کنترل پدیده جوشش، مقدار گردیان خروجی را به ازای هد بالادست 75 سانتی­متر تا 763/0 کاهش داد. اعمال مدل کف بند و پرده آب­بند به لحاظ اقتصادی جایگزین مناسبی برای مدل کف­بند و دو پرده آب­بند می باشد. مدل عددی نیز مطابقت قابل قبولی با مدل آزمایشگاهی در شبیه سازی گرادیان خروجی، نیروی زیرفشار و دبی نشت داشت به­طوری­که در تمام مدل­ها مقدار خطا کمتر از 5% بود. با نزدیک­تر شدن پرده آب­بند به مرکز کف بند، شکل خط جریان در زیر کف بند همگن­تر شد که نتیجه آن تغییرات یکنواخت پتانسیل در زیر کف­بند می­باشد. همچنین نتایج موجود با مدل­های تحلیلی مختلف مقایسه شد و تئوری خوسلا بیشترین مشابهت را با نتایج آزمایشگاهی و عددی نشان داد.}, keywords_fa = {پرده آب‌بند,دبی نشت,کف‌بند,گرادیان خروجی,مدل آزمایشگاهی و عددی,نیروی زیرفشار}, url = {https://www.waterjournal.ir/article_110074.html}, eprint = {https://www.waterjournal.ir/article_110074_084c06fd7cfe7d2635b714d8483f000f.pdf} }