@article { author = {Tafteh, Arash and Emdad, , Mohammad Reza}, title = {Evaluation of SIRMOD and SRFR model to simulate application efficiency in border irrigation in Wheat farms}, journal = {Irrigation and Water Engineering}, volume = {12}, number = {2}, pages = {171-185}, year = {2021}, publisher = {انجمن علمی مهندسی آبیاری و آب ایران}, issn = {2251-7359}, eissn = {}, doi = {10.22125/iwe.2021.142102}, abstract = {It is necessary to study the efficiency of water use as an effective factor to determine water consumption efficiency and improving it. On the other hand, measuring this parameter is time-consuming and expense. Therefore, developed models that have capability to provide accurate simulations at real is vital. In this study, hydrodynamic, Zero initial and SRFR (Balance method) models were used by border irrigation during 2014-2015 for simulating applied water efficiency in wheat cultivation. Calibration results in the first year showed that the complete hydrodynamic and zero initial models had similar performance with 12 and 13% error, respectively, which was compared with the SRFR model in the second year. The results also indicated that that the SIRMOD-HD model with an average R2 of 0.89, the Root Mean Square Error (RMSE) of 1.86% and the Normalized Root Mean Square Error (NRMSE) of 5% is suitable for simulating application efficiency conditions and has better performance than The SRFR model.}, keywords = {Application efficiency,Border irrigation,SIRMOD model,SRFR Model,Wheat}, title_fa = {مقایسه دو مدل SIRMOD و SRFR در برآورد راندمان کاربرد آب در آبیاری نواری در مزارع گندم‌}, abstract_fa = {بررسی راندمان کاربرد آب به‌عنوان عاملی مؤثر در تعیین بهره‌وری مصرف آب و ارتقای آن امری ضروری است. از طرف دیگر اندازه­گیری این پارامتر نیازمند صرف وقت و هزینه می‌باشد. ازاین‌رو مدل‌های پیشرفته‌ای که بتوانند در یک شرایط واقعی شبیه‌سازی مناسب و با دقت مطلوبی را ارائه دهند بسیار حائز اهمیت خواهند بود. در این پژوهش با استفاده از داده‌های اندازه‌گیری شده آبیاری نواری در دو سال 1393 و 1394 از مدل‌های  هیدرودینامیک کامل(SIRMOD-HD)، اینرسی صفر (SIRMOD-ZI) و SRFR (روش بیلان) برای شبیه‌سازی راندمان کاربرد آب در آبیاری نواری درکشت گندم استفاده شد. نتایج واسنجی در سال اول نشان داد که مدل هیدرودینامیک کامل و اینرسی صفر به ترتیب با خطای 12 و 13 درصد عملکرد مشابه داشت که در سال دوم این مدل با مدل SRFR مورد مقایسه قرار گرفت. نتایج ارزیابی در سال دوم نشان داد که  مدل SIRMOD-HD به‌طور متوسط با ضریب تبیین  89/0 و ریشه میانگین مربعات خطای 86/1 درصد و ریشه میانگین مربعات خطای نرمال 5 درصد برای شبیه‌سازی شرایط راندمان کاربرد مناسب بوده و  کارایی بهتری را نسبت به مدل  SRFR از خود نشان می‌دهد.}, keywords_fa = {آبیاری نواری,راندمان کاربرد آب,گندم,مدل SIRMOD,مدل SRFR}, url = {https://www.waterjournal.ir/article_142102.html}, eprint = {https://www.waterjournal.ir/article_142102_405bcc0414dbf2f7184794f37750b414.pdf} }