@article { author = {Talebi, Zeynab and Azhdary, Khalil and Hossieni, Hossien}, title = {تقاطع چهار شاخه، شبیه‌سازی عددی، ناحیه جداشدگی، نسبت ارتفاع سرریزهای خروجی، نسبت دبی ورودی.}, journal = {Irrigation and Water Engineering}, volume = {12}, number = {4}, pages = {42-64}, year = {2022}, publisher = {انجمن علمی مهندسی آبیاری و آب ایران}, issn = {2251-7359}, eissn = {}, doi = {10.22125/iwe.2022.150682}, abstract = {Study of separation zone is so important in right-angled three-branch or four-branch open channel junctions. Some effective parameters in this case are inlet discharge ratio and flow depth which in this research the effect of inlet discharge ratio and weir height ratios (flow depth) on flow pattern and dimensions of separation zone has been simulated numerically. Investigation of numerical results showed that k-ω model well validated with experimental results and had good agreement, so that simulation error was less than 20%. Dimensions of separation zone in main and side channels were directly proportional with the inlet discharge ratio. Also as increases of height ratio of outlet weirs, flow depth increases and separation zone dimensions decreased. According to the analysis of numerical results, dimensions of separation zone in vertical direction, of the channel bed to water surface increased, so that for discharge ratio 0.6 and height ratio of outlet weirs 0.377, length of separation zone at the channel bed, 0.1 m up the bed and water surface was about 60 cm, 75 cm and 85 cm, respectively. So of the water surface towards the channel bed, length of separation zone decreased about %29.}, keywords = {Four-branch junction,Height ratio of outlet weirs,inlet discharge ratio,numerical simulation,Separation Zone}, title_fa = {شبیه‌سازی ناحیه جداشدگی در تقاطع چهار شاخه راست گوشه با Flow 3D}, abstract_fa = {در تقاطع­­های راست گوشه سه شاخه یا چهار شاخه کانال­های روباز، مطالعه جدایی جریان بسیار حائز اهمیت می­باشد. برخی پارامترهای موثر در این زمینه نسبت دبی ورودی و عمق جریان می­باشد که در این تحقیق تاثیر نسبت دبی ورودی و نسبت ارتفاع سرریزها (عمق جریان) در الگوی جریان و ابعاد ناحیه جداشدگی به صورت عددی شبیه­سازی شده است. بررسی نتایج مدل عددی نشان داد که مدل k-ω بیشترین مطابقت را با نتایج آزمایشگاهی دارد، به طوریکه میزان خطای شبیه­سازی کمتر از 20% بود. ابعاد ناحیه جداشدگی در کانال­­های اصلی و فرعی با نسبت دبی ورودی رابطه مستقیم داشت. همچنین با افزایش ارتفاع سرریزهای خروجی، عمق جریان افزایش یافت و منجر به کاهش ابعاد ناحیه جداشدگی شد. مطابق نتایج عددی، ابعاد ناحیه جداشدگی در راستای قائم از کف کانال به سطح آب افزایش یافت، به­طوری­که برای نسبت دبی 6/0 و نسبت ارتفاع سرریز 377/0، طول ناحیه جداشدگی در کف کانال، فاصله 1/0 متر از کف و در سطح آب به ترتیب در حدود 60 سانتیمتر، 75 سانتیمتر و 85 سانتیمتر بود. بنابراین از سطح آب به سمت کف کانال طول ناحیه جداشدگی در حدود 29% کاهش یافت.}, keywords_fa = {تقاطع چهار شاخه,شبیه‌سازی عددی,ناحیه جداشدگی,نسبت ارتفاع سرریزهای خروجی,نسبت دبی ورودی}, url = {https://www.waterjournal.ir/article_150682.html}, eprint = {https://www.waterjournal.ir/article_150682_c7ca21c209d83c05f78321edae37bd8b.pdf} }