@article { author = {vaghefi, Mohammad and Zerehpoush, Hadi and Akbari, Maryam}, title = {Numerical investigation of Radius of Curvature on Flow Pattern around a Submerged T-shaped Spur Dike}, journal = {Irrigation and Water Engineering}, volume = {5}, number = {2}, pages = {145-156}, year = {2015}, publisher = {انجمن علمی مهندسی آبیاری و آب ایران}, issn = {2251-7359}, eissn = {}, doi = {}, abstract = {Spur dike is one of the various hydraulic structures used in rivers, and are utilized in order to protect river banks, keeping the flow away from the walls, and directing them towards the main route. Due to flow digression, a turbulent circulation zone appears around the spur dike. Consequently, in order to prevent local scour, they use a wider, T-shaped nose for the spur dike. In this paper, a study on flow pattern around a 25 percent submerged T-shaped spur dike, located in a 45 degree position, in a 90 degree bend with rigid bed, and various relative radius of curvature 2, 3, 4, and 5, with a constant discharge of 25 lit/s has been conducted using Flow-3D software. Numerical results have been compared with experimental results, and they have been analyzed. The results indicate that with an increase in radius of curvature, the number of vortexes in cross sections near the wing of the spur dike, as well as lateral velocity of the flow increases, and the maximum lateral velocity is found upstream of the wing of the T-shaped spur dike. It was also observed that the less the relative radius of curvature is, the wider zone downstream of the spur dike has relative immobility of the flow.}, keywords = {Flow Pattern,Flow-3D,Radius of Curvature,Submerged T-shaped Spur Dike,90° Bend}, title_fa = {مطالعه عددی تأثیر شعاع انحنا بر الگوی جریان پیرامون آبشکن سرسپری مستغرق}, abstract_fa = {آبشکن‏ها، یکی از انواع سازه‌های هیدرولیکی مورد استفاده در رودخانه می‌باشند که برای حفاظت از سواحل رودخانه، انحراف جریان از کناره‌ها و هدایت آن به سمت مجرای اصلی به کار می‌روند. درنتیجه انحراف جریان، یک ناحیه چرخشی متلاطم در پیرامون آبشکن ظاهر می‌شود. به همین دلیل، برای جلوگیری از فرسایش موضعی دماغه آبشکن را پهن‌تر و به‌صورت سرسپری در نظر می‌گیرند. در این مقاله به بررسی الگوی جریان پیرامون آبشکن سرسپری مستغرق 25 درصد واقع در موقعیت 45 درجه و مستقر در قوس 90 درجه با بستر صلب و با شعاع انحناهای نسبی مختلف 2، 3، 4 و 5 و با دبی ثابت 25 lit/s با استفاده از نرم‌افزار Flow-3D پرداخته شده است. نتایج عددی با نتایج آزمایشگاهی مقایسه و مورد تجزیه و تحلیل قرار گرفته است. نتایج بیانگر این است که با افزایش شعاع انحنا، تعداد گردابه‌ها در مقاطع عرضی نزدیک به بال آبشکن و همچنین سرعت عرضی جریان افزایش‌یافته و محل بیشترین سرعت عرضی در بالادست بال آبشکن سرسپری به وجود آمده است. همچنین مشاهده شد که هر چه شعاع انحناء نسبی کمتر باشد، ناحیه وسیع‌تری در پایین‌دست آبشکن دارای سکون نسبی جریان خواهد بود.}, keywords_fa = {: آبشکن سرسپری مستغرق,الگوی جریان,شعاع انحنا,قوس 90 درجه,Flow-3D}, url = {https://www.waterjournal.ir/article_73651.html}, eprint = {https://www.waterjournal.ir/article_73651_eb7712184349d1ef7b92eedcd4d2cebb.pdf} }