@article { author = {Mirnaseri, mohammad and Emadi, Ali reza and Fazlola, Ramin and Aqajani, Ghasem}, title = {Investigation of the Plan Shape Change Effect and Gate Dimension on Hydraulic Performance of Combined Models of Labyrinth Weir- Gate}, journal = {Irrigation and Water Engineering}, volume = {6}, number = {1}, pages = {16-32}, year = {2015}, publisher = {انجمن علمی مهندسی آبیاری و آب ایران}, issn = {2251-7359}, eissn = {}, doi = {}, abstract = {Weir and Gate are widely used in control, diversion and measurement of flow in irrigation projects due to their simpler and relatively exact relationship. There are sediment and suspended materials in the direction of channels. The accumulation of sediments and suspended materials in the back side of weir and gate caused change of canal shape and reduction of water measurement accuracy. The combined model of weir- gate have the capability of passing settling down from under the gate and suspended materials over weir simultaneously and prevents from accumulation of sediment and suspended materials in the back side of the weir and helps to the accuracy of water measurement and passing flow. The present research investigated ten combined model of labyrinth weir- gate on the effects of plan shape change and gate height on discharge coefficient in the laboratory. The results showed that the existence of gate and increasing of opening height, increased discharge coefficient in combined model of labyrinth weir- gate. On the other hand, existence of gate in combined model of rectangular labyrinth weir- gate in low total upstream water height to weir height have higher effect on the increasing of discharge coefficient. Whereas in combined model of trapezoidal labyrinth weir- gate, with the same of total upstream water height to weir height, had uniform effect on the increasing of discharge coefficient. The results showed that increasing of upstream water height caused interference of water jets of cycles of labyrinth weir and also interference of water flow passing under the gate and flowing water over the weir. Therefore discharge coefficient was lower in deeper depths. On the other hand, in the same depth, the trapezoidal labyrinth weir had less flow interference with respect to rectangular labyrinth weir, which caused higher increase in discharge coefficient in combined model of trapezoidal}, keywords = {Discharge coefficient,Laboratory,Labyrinth weir,Physical Model,Weir- Gate}, title_fa = {بررسی تاثیر تغییر شکل پلان و ابعاد دریچه بر عملکرد هیدرولیکی مدل‌های ترکیبی سرریز کنگره‌ای- دریچه}, abstract_fa = {سرریز و دریچه به علت داشتن روابط ساده و نسبتاً دقیق از کاربرد وسیعی در کنترل، انحراف و اندازه­گیری جریان در     پروژه­های آبیاری برخوردار می­باشند. آب جاری در مسیر کانال­ها، دارای ذرات رسوب و مواد شناور می­باشند. که تجمع رسوبات و مواد شناور پشت سرریز و دریچه سبب تغییر شکل کانال و کاهش دقت اندازه­گیری جریان می­شود. مدل ترکیبی سرریز- دریچه با داشتن قابلیت عبور هم­زمان مواد قابل ته‌نشین شدن از قسمت زیر دریچه و مواد معلق از روی سرریز، از انباشته شدن رسوب و مواد معلق در پشت سیستم سرریز جلوگیری کرده و به افزایش دقت اندازه­گیری و عبور جریان کمک زیادی می­کند. در پژوهش حاضر اثر تغییر شکل پلان و ارتفاع دریچه بر ضریب دبی ده مدل ترکیبی سرریز کنگره­ای- دریچه در قالب مطالعه آزمایشگاهی مورد بررسی قرار گرفت. نتایج نشان داد که وجود دریچه و همچنین افزایش ارتفاع بازشدگی آن، موجب افزایش ضریب دبی در مدل­های ترکیبی سرریز کنگره­ای- دریچه می‌شود. از طرفی وجود دریچه در مدل­های ترکیبی سرریز کنگره­ای مستطیلی- دریچه در (Ht/P) نسبت­های کم ارتفاع کل آب بالادست به ارتفاع سرریز، تاثیر بیشتری بر افزایش ضریب دبی دارد. در حالی­که در مدل­های ترکیبی سرریز کنگره­ای ذوزنقه­ای- دریچه در همه نسبت­های ارتفاع کل آب بالادست به ارتفاع سرریز تاثیر یکنواختی بر افزایش ضریب دبی خواهد داشت. نتایج نشان داد که افزایش ارتفاع آب بالادست باعث تداخل جت­های آب (جریان­های ریزشی) سیکل­های سرریز کنگره­ای و هم­چنین تداخل جریان آب هنگام عبور از زیر دریچه و جریان ریزشی از روی سرریز می­شود، که این امر موجب کاهش ضریب دبی در اعماق زیادتر می­شود. از طرفی در اعماق یکسان، سرریز کنگره­ای ذوزنقه­ای دارای تداخل جریان کمتری نسبت به سرریز کنگره­ای مستطیلی است که موجب افزایش ضریب دبی در مدل­های­ ترکیبی سرریز کنگره­ای ذوزنقه­ای- دریچه نسبت به مدل­های ترکیبی سرریز مستطیلی- دریچه می‌شود.}, keywords_fa = {آزمایشگاهی,ضریب دبی,سرریز- دریچه,کنگره‌ای,مدل فیزیکی}, url = {https://www.waterjournal.ir/article_73819.html}, eprint = {https://www.waterjournal.ir/article_73819_cbff590257830d255c06ce645f22c426.pdf} }