@article { author = {Abbasi, Saeed and Pourshahbaz, , Hanif and Taghvai, Pouria}, title = {Investigation of bed morphological variations in channels with a group of parallel unequal spur dikes at various orientations}, journal = {Irrigation and Water Engineering}, volume = {9}, number = {3}, pages = {38-48}, year = {2019}, publisher = {انجمن علمی مهندسی آبیاری و آب ایران}, issn = {2251-7359}, eissn = {}, doi = {10.22125/iwe.2019.88630}, abstract = {Spur dikes are structures which are constructed at an angle or perpendicular to flow to reduce flow velocity and bank erosion. As constricting structures, spur dikes narrow the flow channel and alter the flow structure in their vicinity, and develop vortices around the constricted region. In this paper the flow pattern alteration and bed morphological variation due to the various orientations of a group of parallel impermeable, non-submerged spur dikes having unequal lengths are numerically investigated. Numerical model validation is carried out utilizing experimental data. The results show that changing the orientation of spur dikes from 90° to 45° (reduction of channel width constriction by 12%), the maximum depth of scouring beneath the first spur dike is reduced by 50%.}, keywords = {Erosion,Sedimentation,group of spur dikes,un-equal length,numerical simulation}, title_fa = {بررسی تغییرات مورفولوژی بستر در کانال‌های دارای سری آبشکن‌های موازی با طول‌های نامساوی و جهت‌گیری‌های مختلف}, abstract_fa = {آبشکن‌ها سازه‌هایی هستند که به منظور کاهش سرعت و فرسایش کرانه به صورت عمود بر جریان یا مورب ساخته می‌شوند. آبشکن‌ها همانند سایر سازه‌های تنگ کننده‌ی مسیر جریان، کانال جریان را تنگ می‌کنند و در مجاورت خود ساختار جریان را تغییر می‌دهند و در اطراف ناحیه‌ی تنگ شده باعث شکل‌گیری گردابه‌هایی می‌شوند. در این مقاله، تغییر الگوی جریان و تغییرات بستر در اثر تغییر زوایای سری آبشکن‌های موازی غیرمتخلخل و غیر مستغرق با طول نامساوی، با استفاده از روش‌های عددی بررسی شده است. اعتبارسنجی مدل نرم‌افزاری توسط مقایسه‌ی نتایج مدل با داده‌های آزمایشگاهی صورت گرفته است. نتایج نشان می‌دهد که با تغییر جهت‌گیری آبشکن‌های با طول نامساوی از 90 درجه به 45 درجه (کاهش 12 درصدی میزان تنگ‌شدگی)، بیشترین عمق آبشستگی در پای آبشکن اول تا 50 درصد کاهش پیدا می‌کند.}, keywords_fa = {فرسایش,رسوب‌گذاری,سری آبشکن,طول نامساوی,مدل‌سازی عددی}, url = {https://www.waterjournal.ir/article_88630.html}, eprint = {https://www.waterjournal.ir/article_88630_8e78574433bd35170a2b529885a0ae7b.pdf} }