نوع مقاله : مقاله پژوهشی
نویسندگان
1 گروه مهندسی عمران، دانشکده فنی و مهندسی، دانشگاه شهید مدنی آذربایجان، تبریز، ایران
2 دانشیار، دکتری مهندسی آب و سازههای هیدرولیکی ،گروه مهندسی عمران، دانشگاه آیت اله بروجردی(ره)، بروجرد، ایران
3 گروه مهندسی عمران، دانشکده فنی و مهندسی، دانشگاه شهید مدنی آذربایجان، تبریز، ایران.
چکیده
کلیدواژهها
موضوعات
عنوان مقاله [English]
نویسندگان [English]
Labyrinth weirs have always received special attention compared to linear weirs due to the increase in flow capacity through the increase in width. The number of 23 models was simulated using Flow-3D software to investigate the effect of various factors such as changing in the height of the dam body, changing the height of the weir apexes (weir height), the discharge passing over the weir, and the effects of different angles of the weir apex in the plan on the amount of bed erosion in the downstream of Labyrinth weir was studied. Validation of the numerical simulation results with the experimental model indicated a very good agreement between the numerical simulation and the experimental values. This reduction in the weir with an apex angle of 60 degrees is more than other models and the scour depth is reduced from 31 to about 90%. Also, the amount of flow traversability in this type of weir is more than other models, which made the weir with an angle of 60 degrees to be introduced as the most optimal weir in investigating the efficiency of the weir and the reduction of scouring compared to linear models, 45 and 90.
کلیدواژهها [English]