@article { author = {Karimi, Seyed Yaghoub and marofi, safar and Zare, Ali Mouhamad}, title = {Removal Direct Blue Dye from Aqueous Solution Using Sulfonated Polyacrylamide Polymer (PAM-SO3) As a Novel Adsorbent}, journal = {Irrigation and Water Engineering}, volume = {12}, number = {4}, pages = {393-415}, year = {2022}, publisher = {انجمن علمی مهندسی آبیاری و آب ایران}, issn = {2251-7359}, eissn = {}, doi = {10.22125/iwe.2022.150756}, abstract = {Entering environmental pollutants into water resources have harmful effects on human health and environment. In recent years, adsorption methods using adsorbents to remove contaminants from water resources have been abundant. Solfounate  and Pentaaza. sulfonated polyacrylamide polymer (PAM-SO3) as a novel adsorbent can be effective for removal of chemical pollutants of the aquatic solution. The purpose of this research is removal of Direct Blue using PAM-SO3 as an adsorbent from polluted water in vitro. The effects of variables such as pH, contact time, initial concentration, adsorbent amount were observed to reach best adsorption conditions. Isotherms of Langmuir, Freundlich and Temkin have been fitted with the data of experiment. In addition, kinetics of pseudo- first order, pseudo- second order, intra-particle diffusion and Elovich were also fitted with the [1]experiment data. Also, the results indicated that the best conditions for removal of Direct Blue dye were: pH= 2, removing time= 45 minutes, adsorbent dosage= 0.014 g and initial concentration of dye= 800 mg L-1. For PAM-SO3, Langmuir isotherms showed a good agreement with the experimental data. Using this model to maximize absorption capacity of 5000 (mg g-1) for PAM-SO3. Absorption rates showed a quick responses which was less than one hours. Based on these results, the adsorption kinetics of pseudo- second- order was more consistent with the experimental data (R2=0.99). The results show that PAM-SO3 absorbent is effective in removing Direct Blue contaminants from the aqueous solutions due to its high surface area and rapid kinetics of the reactions. Therefore, PAM-SO3 is recommended as an efficient adsorbent to remove Direct Blue from aqueous solutions.  }, keywords = {Adsorption,Isotherms Models,Kinetics models,Direct Blue}, title_fa = {حذف رنگ دایرکت بلو از محلول‌های آبی با استفاده از پلیمر پلی آکریل آمید سولفونه شده (PAM-SO3)به عنوان یک جاذب جدید}, abstract_fa = {ورود آلاینده‌های زیست محیطی به منابع آب اثرات زیان‌باری بر سلامت انسان و محیط زیست دارد. در سالیان اخیر روش‌­های جذب سطحی با استفاده از جاذب­های سنتزی جهت حذف فلزات سنگین و رنگ­های صنعتی استفاده فراوان پیدا کرده است. پلیمر پلی­آکریل­آمید سولفونه شده (PAM-SO3)  به عنوان جاذب سنتزی می­تواند در حذف رنگ از محیط­های آبی مؤثر باشد. هدف از کار تحقیقاتی حاضرحذف رنگ دایرکت بلو به وسیله PAM-SO3 به ‌عنوان جاذب سنتزی از آب‌­های آلوده در شرایط آزمایشگاهی می­باشد. در این تحقیق، اثر متغیرهای pH، زمان تماس، مقدار جاذب و غلظت اولیه در کارایی حذف رنگ دایرکت بلو از آب­های آلوده مورد بررسی قرار گرفت. داده­های به دست آمده با ایزوترم­های لانگمیر، فرندلیچ و تمکین و سینتیک­های واکنش شبه درجه اول، شبه درجه دوم، انتشار درون ذره­ای و الوویچ برازش داده شدند. برای جاذب پلی آکریل آمین اصلاح شده مدل لانگمیر تطابق بیشتری با داده‌­های تجربی داشت و با استفاده از این مدل ماکزیمم ظرفیت جذب mg g-1 5000 برای جاذب به دست آمد. همچنین نتایج نشان دادند که سینتیک جذب از معادله شبه درجه دوم برای آلاینده دایرکت بلو مطابقت بیشتری دارد (99/0 R2=). همچنین یافته­های پژوهش نشان داد که بهترین شرایط به منظور حذف رنگ دایرکت بلو در مقادیر pH برابر 2، زمان 45 دقیقه، مقدار جاذب 014/0 گرم و غلظت 800 میلی‌گرم بر لیتر می­باشد. نتایج حاصل نشان می‌دهد که جاذب اصلاح شده به دلیل داشتن سطح موثر بالا و داشتن گروه­های عاملی سولفونه (SO3)، ماکزیمم ظرفیت جذب بالا و سینتیک سریع واکنش، جاذبی موثر در حذف آلاینده رنگ دایرکت بلو از محیط­های آبی می­باشد. لذا استفاده از این جاذب به منظور حذف رنگ دایرکت  بلو از محیط­های آبی بخصوص پساب صنایع نساجی پیشنهاد می­گردد.}, keywords_fa = {جذب سطحی,مدل‌های ایزوترم,مدل‌های سینتیک,دایرکت بلو}, url = {https://www.waterjournal.ir/article_150756.html}, eprint = {https://www.waterjournal.ir/article_150756_ff2bc274a862e91cb2acc43ee2e686fa.pdf} }