@article { author = {Zayeri, Mohammadreza and Ghomeshi, Mehdi}, title = {Numerical Analysis on the Effects of Porous Plate to Control Turbidity Currents}, journal = {Irrigation and Water Engineering}, volume = {8}, number = {1}, pages = {18-29}, year = {2017}, publisher = {انجمن علمی مهندسی آبیاری و آب ایران}, issn = {2251-7359}, eissn = {}, doi = {}, abstract = {  Abstract Reservoir sedimentation can result in loss of much needed reservoir storage capacity, and therefore reducing the useful life of dams. The turbidity current is one of the most important factors that affects sediment distribution in reservoirs and represent a major problems of manmade reservoirs. One of the methods to control or depreciation turbidity currents in reservoirs is create solid obstacle in the reservoir. In this study, the effect of the porous plate on turbidity current with different porosity 0.3, 0.5 and 0.67 percent are studied using FLOW3D software. The turbulence models used for simulation are , RNG and . The results showed that  turbulence model is more consistent than other models in the simulation of vertical distribution of the turbidity current. The results show that the waves formed on the upstream of the porous plate are the B type. The use of plate with porosity of 0.67 percent can decrease the flow discharge of turbidity current equal to 64.5% and reduce the porosity to the 0.3 percent case the reduction of discharge of turbidity current to 30%. [ahoo.com}, keywords = {Keywords: Grid plate,Turbidity current,porosity,FLOW3D software}, title_fa = {بررسی عددی تأثیر صفحه متخلخل در کنترل جریان غلیظ}, abstract_fa = {مساله رسوب‌گذاری در مخزن سد مهمترین عامل محدودکننده عمر مفید آن است. یکی از عوامل بسیار مهم در رسوب‌گذاری  مخازن و نحوه توزیع رسوبات، پدیده جریان غلیظ می باشد که به عنوان یکی از مشکلات عمده سدهای در حال بهره‌برداری است. یکی از روشهای کنترل یا استهلاک جریان غلیظ در مخازن سدها ایجاد موانع در مخازن است. لذا در این تحقیق اثر استفاده از مانع صفحه‌ای مشبک با درصد تخلخل ۳/۰، ۵/۰ و ۶۷/۰ در فواصل مختلف با استفاده از نرم افزارFLOW3D  بررسی شده است. برای شبیه سازی جریان غلیظ از مدل‌های آشفتگی ، RNG و  بهره گرفته شد. نتایج حاصل از مدل‌سازی نشان میدهد مدل آشفتگی  تطابق بیشتری نسبت به سایر مدل های موجود در شبیه سازی توزیع عمودی سرعت جریان غلیظ دارد. همچنین نتایج نشان می دهد که امواج شکل گرفته در بالادست مانع متخلل از نوع B مـی‌باشـد. استفاده از مانع صفحه با تخلخل ۶۷/۰ میتواند موجب کاهش ۵/۶۴ درصدی در دبی عبوری جریان غلیظ شود و با کاهش تخلخل صفحه به ۳/۰ درصد مقدار کاهش دبی عبوری جریان غلـیظ ۳۰ درصـد کاهش می‌یابد.}, keywords_fa = {واژه‌های کلیدی: تخلخل,جریان غلیظ,موانع صفحه‌ای,نرم افزار FLOW3D}, url = {https://www.waterjournal.ir/article_74203.html}, eprint = {https://www.waterjournal.ir/article_74203_b364e66310f9147d83762558139e1702.pdf} }